Falcon F1000 and F3400 Facilities Monitoring Systems

   Products
     SeaHawk
     Falcon
     Raptor

Falcon F-Series Monitoring Systems

The F-Series monitoring systems - the F3400 and F1000 - provide equipment protection by monitoring critical operating parameters in enterprises, remote network facilities, communication rooms, unmanned facilities, and critical support systems.

These stand alone systems operate via embedded firmware that handles all data collection, alarm reporting, and multiple concurrent communication mediums.

Versatile Environmental Monitoring
Both the F1000 and F3400 accommodate up to 4 analog, 4 digital (dry contact) or thermistor signals. The F3400 allows for an additional 24 digital only inputs. The inputs can be used to monitor simple contact closure signals such as summary alarms, thermistor temperature sensors, or analog inputs (4-20mA) that provide variable output such as temperature, humidity, voltage, current or pressure. Both systems provide 2 relay outputs (form C) for additional equipment control or annunciation of alarm conditions.

Web-based Monitoring & Security Surveillance
The F-Series systems provide web-based monitoring and access to status information about each device being monitored. In addition, it can be integrated with any SNMP management system (Gets/Sets, Traps) and supports IP surveillance camera integration. Web pages are protected by a three-level read/write/administrator encrypted password protection.

Redundant Alarm Notification
When an alarm occurs early notification can help you avoid pending problems. Immediate notification can be sent via SNMP traps and up to four recipients via e-mail and paging. Also, with an optional internal modem, up to four phone numbers can be alerted of alarm conditions.

Modbus Integration
Both F-Series systems come standard with the capability to communicate with up to eight RLE leak detection systems via the modbus protocol, including the LD5100, LDRA6, LD5000, and LDZ8. This two-wire communication allows for direct 'plug-and-play' (PnP) integration between the F-Series systems and water detection controllers.

Falcon F1000

8 universal inputs (4 digital / thermistor, 4 analog (4-20mA)
2 form C relay outputs
24 VDC

Falcon F3400

8 universal inputs - (4 digital / thermistor, 4 analog (4-20mA)
Additional 24 digital only inputs
2 form C relay outputs
24 VDC

F-Series Communication Ports

RJ45 - Network, 10 BaseT
EIA-232 - Direct connect, Modbus
EIA-485 - Modbus

F-Series Options

RJ11 - Internal, PPP enabled modem
Internal temperature/humidity sensor
BACnet client enabled
Vertical flush mount brackets

Falcon F-Series Datasheet (440KB PDF)

Additional Information on the F-Series


	F-Series Monitoring Systems Versatile Monitoring 4 digital/thermistor 4 analog (4-20mA) 2 relay outputs F3400 ~ additional 24 inputs Redundant Alarm Notification of up to four recipients Multi-protocol Notification via alphanumeric or numeric paging of up to 4 numbers with optional modem Surveillance Cameras up to 5 cameras or other IP addressable devices Seamless Integration with any SNMP management system Internal Alarm Log of the 100 most recent alarms viewable from any web-browser Secure System via three-level encrypted password protection Easy PnP Integration with RLE modbus-enabled equipment Optional Modem Available
	F-Series in the News All Falcon Products

Falcon F-Series Monitoring Systems

RLE Technologies - The Power of Engineered Solutions Falcon F-Series Monitoring Systems

RLE Technologies - The Power of Engineered Solutions
Falcon F-Series Monitoring Systems